The tiles have been tested at CSIRO in
Sep 2003 - a copy of the test report is available on request.
The A and G range of tiles are produced by
different manufacturers, and so were tested separately.
Test
Description
A Tiles
G Tiles
AS4459-3:1999
Water absorption
19.10% BIII
14.51% BIII
AS4459-4:1997
Modulus of rupture
23.16 N/mm2
Pass
23.10 N/mm2
Pass
Breaking strength
574 N
401 N
AS4459-10:1999
Moisture expansion
0.004%
0.017%
AS4456-10:1997
Salt attack resistance
General purpose
Exposure (b)
These tiles are for internal use and are not
designed to withstand frost. If used externally, they should be
protected from the worst of the cold weather.
All
photographs and designs on this site are copyright to Darian Design
2005-11 unless credited elsewhere and may not be reproduced in any form
without permission.
